Known Issues with kmi - the KnoppMyth Installer:

Help -> Tab 1		- Documentation
	Many clean-ups and corrections need to be made and
	it needs to be brought up to date.  Priority = medium.

Help -> Tab 2		- The IRC Client
	You need to be connected and online to change your
	nick.  Priority = extremely low.

Install -> Tab 4	- Sound Testing
	Has to be made to work with alsa sound instead of OSS.
	Probably only works on my system!  Priority = High!

Install -> Tab 5	- Tuner Card Config and Test
	Much work needs to be done here to determine what kind
	of tuner card and what module set it needs.
	In short, this tab does _not_ work.  Priority = High!

Install -> Tab 8	- Configure Remotes
	No actual Lirc configuration takes place.
	Nothing present for IR Blaster page.  Priority = low.

Install -> Tab 9	- Disk Selection and Partitioning
	Showing Current partitions & Auto partitioning is done.
	The Manual partitioning is non-existent.  Priority = medium.

Install -> Tab I	- Start the Installation Action
	The actual steps to perform the Installation are
	not really performed, but are only simulated!
	Priority = Highest!

Upgrade	-> Tab 4	- Scan for Older Knoppmyth
	No mounting takes place, but if a KnoppMyth is
	mounted with an /etc/KnoppMyth-version, it should
	be detected.  Priority = High!

Upgrade	-> Tab 5	- Attempt Backup of Older KnoppMyth
	No mounting takes place and the steps to perform the
	backup are only simulated.  Priority = medium.

Upgrade -> Tab U	- Start the Upgrade Action
	The actual steps to perform the Upgrade are not really
	performed, but are only simulated!  In fact the steps
	are currently just those from the Installation script.
	This needs to be fixed!  Priority = High!

Pastimes -> Tab C & D	-
	Empty.  No code developed for these pages.
	Priority = very low.